海月构造带东三段滩坝砂分布及成藏主控因素分析

辽河滩海地区海月构造带东三段沉积期,三角洲前缘砂体受湖岸流和波浪的改造,形成了一系列滩坝砂沉积,细分为滩砂和坝砂,水动力强则形成坝砂,水动力弱则形成滩砂;滩坝砂平行于湖岸线呈带状分布,易于形成岩性圈闭。滩坝砂受砂体发育规模、储层物性、断裂输导体系及封堵性等多种因素控制,在滩坝砂较为发育的东三下段,靠近海南断层、盖州滩断层且封堵条件优越的滩坝砂最易于成藏。     

An improved cuckoo search algorithm for the problem of electric distribution network reconfiguration

Power loss reduction has an important role in operating electric distribution network system. There are a lot of methods for reduction power loss such as capacitor placement, distributed generation placement and electric distribution network reconfiguration (EDNR). Among these methods, the EDNR is an efficient technique to reduce power loss due to without taking any costs. However, the EDNR problem is a nonlinear, discrete problem and lots of extreme points. Therefore, it is necessary to have efficient methods for solving the EDNR problem. In this paper, an improved cuckoo search algorithm (ICSA) is proposed for solving the EDNR problem. In which, based on disadvantages of exploration and exploitation process of cuckoo search algorithm (CSA) for solving the EDNR problem, a local search mechanism is added to exploit candidate solutions existing around the current best solution. The calculated results on the simple distribution networks to complex distribution networks show that ICSA has ability for finding the global optimal solution with much smaller iterations and better quality of obtained solution compared with CSA and some other improved versions of CSA. The performance comparisons with other existing methods available in previous studies and the software of Power System Simulator/Advanced Distribution Engineering Productivity Tool (PSS/ADEPT) also lead to the better electric distribution network configuration with smaller total power losses. As a result, ICSA is a potential and reliable method for solving the EDNR problems.     

An experimental study on the spray characteristics of pressure nozzle in a fluid bed granulation

The particles with a narrow size distribution are proper products in a fluid bed granulation and coating. As well, the process efficiency is one of the most important parameters, and the wall deposition of sprayed liquid reduces it. The modality of spray volume distribution is a key parameter in the definition of particle size distribution and process efficiency. This work is done in two steps: In the first step, an experimental study on spray characteristics including spray flux distribution, spray cone angle, and discharge coefficient is conducted. Based on the experimental data, the curves of liquid volume flux versus nozzle pressure and height are obtained. The results indicate that the flux distribution changes significantly with even small pressure and height changes. In the second step, the granulation process is carried out in a semi-industrial conical fluid bed, and the particles size distribution curves and the deposited mass on the bed wall are obtained. The results show that the precise determination of the spray flux distribution is an appropriate way to predict the well-advised nozzle pressure/height in order to achieve the narrow particle size distribution and high efficiency of the process.     

Ab Initio Molecular-Dynamics Simulation Liquid and Amorphous Al_94-xNi₆La_x (x=3-9) Alloys

Ab initio molecular-dynamics simulations have been used to investigate the liquid and amorphous Al94-xNi6Lax (x=3-9) alloys. Through calculating the pair distribution functions and partial coordination numbers, the structure and properties of these alloys are researched, which will help the design bulk metallic glass. The concentration of La atoms can affect the short-range order of Al94-xNi6Lax alloys, which is also studied in this calculation result.     

无失效数据机载多余度EWIS可靠性研究

针对高可靠度机载多余度EWIS各组成部分寿命服从指数分布但参数未知的情况，提出采用无失效数据可靠度分析方法评估EWIS的可靠度水平。通过Monte-Carlo仿真方法对连接形式为“先并联、后串联”EWIS各组成部分寿命进行抽样，利用“最小最大值”方法获得系统寿命的抽样值，用概率纸检验法初步判断EWIS寿命是否服从威布尔分布，再用Pearson拟合优度检验法判断EWIS寿命是否服从威布尔分布。结合无故障飞行时间的样本值与EWIS寿命服从威布尔分布的假设，采用无失效数据分析方法评估EWIS的可靠度水平。研究方法对机载多余度EWIS无失效数据可靠度分析有一定的贡献。     

Design of switchable band‐notched frequency selective absorber

An active band‐notched frequency selective absorber (BNFSA) with switchable notch band is proposed in this article. The BNFSA is a two‐layer structure composed of a lossy layer at the top and a ground plane at the bottom, separated by an air spacer. The element of the lossy layer is a lumped‐resistor‐loaded metallic dipole with a parallel LC resonance structure, which is realized by complementary n‐shaped resonator (CnR) inserted in the center, and PIN diode is welded at two arms of CnR. The bias circuit printed on the back of the substrate of the lossy layer connects to anode and cathode of the diode by via hole and isolates by the inductor. Simulation results show that the notch bands are located at 4.50 and 6.81 GHz when the diode sets to ON and OFF, respectively. To validate the performance of switchable BNFSA, the prototypes are fabricated and measured, reasonable agreement between simulated and measured results is obtained.     

A novel miniaturized frequency selective surface

A novel single layer miniaturized frequency selective surface made of circular unit cell elements is presented in this article. The frequency selective surface (FSS) unit cell measures 0.055λ₀ × 0.055λ₀, where λ₀ corresponds to its free space wavelength. The proposed FSS offers band stop characteristics with bandwidth of 137.5 MHz centered at 1.39 GHz. The symmetrical structure of the unit cell elements provides polarization independency. The miniaturized unit cell elements help achieving angular independency for both TE and TM mode of polarization. The miniaturized design provides excellent angular independency with negligible frequency shift for varying incident angles. A prototype of the FSS is fabricated and its simulation results are validated using measurements.